A: All product bodies and battery packs have a 10 year warranty. And fans, WIFI modules and other consumable accessories have one year warranty. After the warranty period, BLUETTI still provides paid maintenance.

A: During the Warranty Period, we will send someone to repair the defective part provided that BLUETTI is properly notified of the product defect as well as your address and contact number via BLUETTI’s APP.

A: Yes, we have third party product liability insurance worldwide, which covers up to 4.000.000€.

A. : Yes, regular maintenance insures that your system is operating properly and safely. It’s a good idea to have it inspected and serviced a year. Usually 300€ per visit.

A.: The EP600 is safe and reliable. Please note that keep it away from heat sources(heaters, fire, etc), direct sunlight, severe impacts or punctures, and chemicals. the which may cause dangerous accidents. The manufacturer warranty will cover repairs and replacements due to factory errors, but not damage outside of that.

A: It can provide three-phase 400V,6kW three-phase power and 230V,2kW sigle phase power, which can meet the household electricity needs.

A: As for handling capacity, we guarantee a minimum of 15,48MWh per battery pack.

A: Less than 50dB.

A:The max input power is 6000W. And there are 2 methods to recharge:
1. Charge by solar panels
2. Charge by wall outlet

A:Yes, the maximum charging power is 6kW. And the system gives priority to solar charging.

A:Yes, you can. Please tell me the power and voltage of your existing PV system, as well as the power and voltage of the inverter, and we will provide you with a suitable solution.

A:Yes, we have a built-in intelligent energy management system. You can set the charging and discharging time and SOC value to maximize the solar power and reduce the electricity bills.

A:There are 2 MPPT. the specific number of PV panels should be calculated according to the power. In general, the total open circuit voltage of each circuit should not exceed 550V, and the maximum operating current should not exceed 12,5A.

A:No, it can’t. The EP600 can be charged by three-phase AC and PV.

A:Yes, you can easily control it with BLUETTI’s app.

A:Yes, you can easily control it with BLUETTI’s app.

A: Yes, you can download BLUETTI’s APP (iOS and Android) on your cell phone so that you can easily control and monitor your EP600 remotely. (Support Bluetooth and Wi-Fi)

A: No, the system comes with a maintenance switch. Press it to trigger the grid power supply immediately.

A: It depends. Please provide us with your electricity household consumption for the past three months and the main use of EP600 and we will send you a solution via email.

A: 1. For the long run: per phase should be less than 2000VA
2. Last up to 10 minutes: single-phase 2200VA, for three-phase 6600VA
3. for special loads with large starting currents such as pumps and motors, it may not work.

A: No, the EP600 can only be connected to the B500. It can be connected to up to 8 B500.

A: It is about 50 watts.

A: Yes, you can choose ECO mode in BLUETTI’s APP (iOS and Android).

A: The EP600 is able to supply single-phase and three-phase power. For high-powered appliances in your home, such as dryers, induction cookers and so on, EP600 will supply three-phase power.

A: Within 10 milliseconds.

A: 6kW for AC or PV charging

A: Yes, you need. Additional cables will be used for installation, please consult your installer for more details.

A: The cables for external connections are provided by the installer. Exact specifications are subject to the actual product.

A: We have fully considered the weight-bearing and heat dissipation when designing the EP600. The battery box can withstand a weight of more than 200KG, 4 battery packs or three battery packs & a product body can be stacked on it..

A: Yes, the EP600 needs to be grounded. Proper grounding is essential to electrical safety.

A: Yes, you can choose three-phase or single-phase power to charge your electric car depending on the configuration of your car.

A: Yes, it is.

A: Yes, but single-phase electricity cannot be used as a charging power source. Only PV charging can be used.

A: Yes, installing EP600 is not a DIY job! Please note that the system should be installed by a licensed electrician. Installation by our authorized installers is highly recommended.

A: No, it is for residential use, not certified for medical use.

A: Germany, Netherlands, Belgium, Luxembourg, France, Spain, Italy, Poland, and Austria.

A: You can learn more through indicators on the EP600 or the APP in your phone.

A: Yes, please consult the bank advisor to get a loan from the bank and make the payment.

A: No, as for customers in Germany or Spain, we can introduce you to a local bank, but we do not get involved in the loan process. Please communicate directly with the bank and submit the documents to get the loan. For other countries, please find your own local bank.

A: Then you will have to pay the full cost of purchasing by yourself. Or you can cancel the order and we will refund the full deposit. It can save up to 2000€ when you book in advance.

A: We reserve your right for 4 weeks. After 4 weeks, you will forfeit this opportunity by default and the deposit will be refunded.

A: Yes, we will process the refund for you as soon as possible and your deposit will be refunded to the payment account within a month. This is a great product. Please think about it！

A: It depends on the result of the bank’s examination and is related to your bank credit history and existing loan stock. Many European countries now support the installation of PV energy storage systems for their nationals, so it will be easier for you to get the relevant bank support.

A: We are sorry that cash payments are not supported, but bank transfer is available.

A: Multiple cards payment together is not supported. You can pay with PayPal, bank cards, and credit cards, and installment payments are supported.

A: Yes, the cost of No Reason Returns shipping will be deducted from your refund. The refund fee depends on the payment platform and method.

A: After the order is completed, a BLUETTI representative will contact you by phone to confirm the installation environment and conditions for the EP600. During the call, our representative will confirm the appointment time with you (usually within a week). The agreed-upon appointment time will be the starting point, and BLUETTI promises to complete the installation and commissioning of the energy storage device within 10 working days. Compensation will be provided to consumers in case of any delay beyond this period.

A: If the customer is unable to be present on the agreed installation date due to reasons such as long-distance travel, unexpected circumstances, or force majeure (such as natural disasters), the customer can reschedule a new installation time.
The compensation measures for delayed delivery mentioned above will no longer be valid in this case.

A: The installation of the BLUETTI EP600 includes the following steps and standards:
System assembly and installation: The EP600 system consists of multiple modular components. After assembly, these components need to be installed in the appropriate positions and connected to the grid and other devices such as solar panels.
Electrical installation and connection: The installer performs electrical connections at appropriate positions to ensure that the system can operate normally. These connections must comply with national and local electrical regulations and be tested and verified.
Program setting and calibration: The installer sets the program for the energy storage system and calibrates the system to ensure that it can operate according to the design specifications. These program settings and calibrations may need to be adjusted and updated after installation.
Performance testing and verification: After installation, the installer performs performance testing and verification on the energy storage system to ensure that it meets design specifications and user requirements. These tests may include capacity testing, efficiency testing, cycle life testing, and safety testing.
When all components are installed correctly and have passed performance testing and verification, the installation of the energy storage system can be considered complete. Our installer will provide an installation report for you to sign and confirm.
All rights of interpretation belong to PowerOak GmbH.